100mm diameter, 304 stainless steel housing

Pressure units converting, automatic zero clearing, backlight, power on/off

Max & Min data record

Low power consumption, 3 AA battery could work for 18-24 months

Six-digit LCD display, white backlight

60mm diameter, 304 stainless steel

Multiple pressure units convert， automatic zero clearing, backlight, power on/off

Low power consumption, 2 AAA battery could work for years

Four-digit LCD display, pressure displayed in percentage

Multiple output signal options

With LCD or LED display

Strong anti-interference, Surgeproof, Reverse power protection

Integrated 316L stainless steel diaphragm

High Accuracy, High Stability

1. With short circuit protection and reverse polarity protection

2. Anti-interference and surge protection

3. Intrinsically safe products, in line with the requirements of Exia Ⅱ CT6Ga of the national GB3836.4 GB3836.1 standards

4. Flameproof products, in line with the requirements of Exdb Ⅱ CT6Gb of the national GB3836.2-2021 and GB3836.1-2021 standards

5. Multiple output signals of voltage and current

6. Stable and reliable performance

7. 316L stainless steel isolation diaphragm, integrated design

8. Can measure gauge pressure, absolute pressure and sealed reference pressure

Excellent resistance against overload, shock and resistance to electromagnetic compatibility, Strong anti-interference, surge-proof

Multiple process connection and electrical connection options

High Stability, Original Germany Chip

Integrated 316L stainless steel diaphragm

Wide measuring range, can measure absolute pressure, gauge pressure and sealed gauge pressure

1. RS485 interface or 4 ~ 20mADC two-wire current output

2. Digital compensation using surface fitting nonlinear correction technology in the entire temperature range

3. Nominal accuracy 0.1%FS, no temperature error at 10°C ~ 50°C (customizable 0.05 level)

4. Response frequency 100Hz

Multiple output signal options

With LCD or LED display

Strong anti-interference, Surge-proof, Reverse power protection

High Accuracy, High Stability, Original German

Integrated 316L stainless steel diaphragm

 Multiple output signal options 

 With LCD or LED display 

 Strong anti-interference, surge-proof, reverse power protection 

 High Accuracy, high Stability, original Germany Chip 

 Integrated 316L stainless steel diaphragm

 Strong anti-interference, surge-proof 

 Multiple output signal options 

 Integrated 316L stainless steel diaphragm 

 Excellent resistance against overload and static pressure

Several sizes of display, could be vertically or axially mounted.

Multiple pressure units converting: MPa or kPf/cm2 or PSI

Four-digital LCD display in time

Delay control, inversion of control, real-time display, error reset and password protection.

 4 and 1/2-bit LCD display with high resolution. 

 3-digit ambient temperature display 

 Micro power design, pressure peak holding 

 Dynamic display of pressure percentage 

 Five pressure unit switching: psi, bar, kPa, MPa, kg/cm²

Multiple output signals are optional

Anti-interference, surge-proof

High Accuracy, High Stability, Original Germany Chip

316L Integrated 316L stainless steel diaphragm

High static pressure resistance and strong overload resistance

 High Accuracy： 0.05%F. S, resolution could be 1mm 

 Full Function：level、temperature、conductivity real-time monitoring 

 Low Power：intelligent power design and management 

 Small Size：intergration design

 Long Distance Transmission：RS485，could be 1. 2Km 

 Networking：MOBUS -RTU，multipoint network support、addressable operation 

 Anti-interruption：anti-interface integration、anti-interruption and over-voltage protection

High quality and high stability pressure sensing element, integrated measurement of water level and temperature, full range digital calibration, temperature error in the full temperature zone

Compensation power supply reverse connection protection, overvoltage protection, anti-surge, electromagnetic interference, all stainless steel sealing structure, IP68 protection

Multiple output signals are optional

All welded design, "0" leak points and permanet sealing

Strong anti-interference,surge-proof

Measurement Range：0~1...200mH2O

316L Stainless steel isolation diaphragm, integrated design

Anti-lightning, IEC61000-4- 5/Level-4 Standard

Excellent resistance against overload, shock and resistance to electromagnetic compatibility

Multiple output signals are optional

All welded design, "0" leak points and permanent sealing

Anti-interference and surge-proof

Measurement range：0~1...200mH2O

Integrated 316L stainless steel diaphragm

Anti-lightning, IEC61000-4- 5/Level-4 standard

Excellent resistance against overload, shock and resistance to electromagnetic compatibility

• Multiple output signals are optional;

• Wide measurement range: 0~1…100mH2O;

• Anti-interference and anti-surge protection;

• Polytetrafluoroethylene shell, strong corrosion prevention;

• Double output standard signals of liquid level and temperature 

• Reverse polarity protection 

• Suitable for liquid level and temperature measurement 

• Degree of protection IP68 

• Quality assurance of automatic production line, stable and reliable

• Multiple output signals are optional 

• LCD、LED display optional

• Reverse polarity protection, anti- interference protection, overvoltage and overcurrent protection 

• High accuracy and stability 

• 316L stainless steel isolation diaphragm, integrated design

Exquisite appearance and design

Zero and Span can be adjusted on site

Reverse polarity protection, overcurrent and overvoltage protection

Impact resistance, vibration resistance and corrosion resistance

High cost performance

Multiple output signals are optional

It can be equipped with LCD and LED display

Reverse polarity protection, antiinterference protection, overvoltage and overcurrent protection

High precision and good reliability

Integrated design

Exquisite appearance and design

Reverse polarity protection, overcurrent and overvoltage protection

Material of stainless steel, corrosion resistant

High cost performance

Diversified output forms

1. The measurement accuracy is not affected by changes in fluid density, viscosity, temperature, pressure and conductivity.

2. There are no obstructing flow parts in the measuring tube, no pressure loss, and the straight pipe section requirements are low.

3. The converter uses a liquid crystal backlight display, which makes it easy to read in direct sunlight or in a dark room.

4. The parameters are set by infrared touch buttons, and they can be set safely without opening the cover of the converter in harsh environments.

5. The flow meter is a bidirectional measurement system with three integrators: forward total, reverse total and difference total: it can display forward and reverse flow, and has multiple outputs: current, pulse, digital communication, HART.

6. The converter has self-diagnosis alarm output, no-load detection alarm output, flow upper and lower limit alarm output, batch control and other functions.

7. It can be used not only for general process detection, but also for the measurement of slurry, pulp and paste liquid.

8. The high-pressure electromagnetic flowmeter sensor adopts PFA mesh lining technology, is resistant to high pressure and negative pressure, and is specially used in petrochemical, mining and other industries.

1. High accuracy, generally up to ±1%R, ±0.5%R, high-precision type up to ±0.2%R;

2. Good repeatability, short-term repeatability up to 0.05%~0.2%. It is precisely because of its good repeatability that frequent calibration or online calibration can obtain extremely high accuracy, and it is the preferred flow meter in trade settlement;

3. Output pulse frequency signal, suitable for total volume measurement and connection with computer, no zero drift, strong anti-interference ability;

4. High frequency signal (3~4kHz) can be obtained, and signal resolution is strong;

5. Wide range, medium and large diameter can reach 1:20, small diameter is 1:10;

6. Compact and light structure, easy installation and maintenance, large flow capacity;

7. Suitable for high-pressure measurement, no holes are required on the meter body, Easy to make high-pressure instruments;

8. There are many types of special sensors, which can be designed into various special sensors according to the special needs of users, such as low-temperature type, bidirectional type, downhole type, sand mixing type, etc.;

9. It can be made into an insertion type, suitable for large-caliber measurement, with small pressure loss, low price, can be taken out without interruption, and is easy to install and maintain.

1. Measurement advantages

Directly measure mass flow, unaffected by factors such as temperature, pressure, and flow rate. Can display multiple parameters such as mass flow, volume flow, cumulative flow, density, and temperature. 

Excellent performance in small flow measurement, with a maximum range ratio of 50:1.

2. High measurement accuracy

High measurement accuracy, up to 0.15 for standard models, and up to 0.5 for high-pressure and cryogenic models. High measurement stability, ensuring long-term accurate measurement.

3. Design advantages

Integrated design, small size, easy installation; compact structure suitable for small installation space. Split structure (sensor and transmitter separated), extended connection part to ensure measurement 

stability (standard for cryogenic models). High-strength composite metal material, excellent resistance to hydrogen embrittlement (standard for high-pressure models). High pressure bearing capacity, 

ensuring safety and reliability of ultra-high pressure applications (standard for high-pressure models).

4. Wide range of product selection

Various flow tube designs to adapt to different flow rate ranges and meet various process requirements. Diverse sensor interface sizes, transmitter mounting methods and output signal options provide 

strong compatibility and can be seamlessly integrated into various systems.

1. High pressure resistance (1.0 ~ 45MPa)

2. High and low temperature resistance (-196℃ ~ 200℃)

3. Can measure various viscous media

4. High precision and high repeatability

5. Pulse output / analog output optional

6. Wide range ratio (1:100)

7. Wide measuring range

8. Strong anti-corrosion and anti-fouling ability (acid and alkali)